Aruba AP-514 (Q9H57A)
  1. Trang chủ
  2. Sản Phẩm
  3. Công Nghệ Thông Tin và Dự Án
  4. Thiết bị mạng HPE
  5. Wifi Aruba
Aruba AP-324 (JW184A)
Aruba Instant IAP-325 (JW325A)

Aruba AP-514 (Q9H57A)

Q9H57A – Wifi Aruba AP-514 (RW) Dual Radio 4×4:4 + 2×2:2 802.11ax External Antennas Unified Campus AP. AP-514: Indoor, dual radio, 5GHz 802.11ax 4×4 MIMO and 2.4GHz 802.11ax 2×2 MIMO.

Danh mục:

Mô tả

Thiết bị phát sóng Wifi Aruba AP-514 (Q9H57A)

Wi-Fi Radio Specifications

  • AP type: Indoor, dual radio, 5GHz 802.11ax 4×4 MIMO and 2.4GHz 802.11ax 2×2 MIMO
  • 5GHz radio:
    • Four spatial stream Single User (SU) MIMO for up to  4.8Gbps wireless data rate to individual 4SS HE160 802.11ax client devices (max)
    • Two spatial stream Single User (SU) MIMO for up to  1.2Gbps wireless data rate to individual 2SS HE80 802.11ax client devices (typical)
    • Four spatial stream Multi User (MU) MIMO for up to 4.8Gbps wireless data rate to up to four 1SS or two 2SS HE160 802.11ax DL-MU-MIMO capable client devices simultaneously (max)
    • Four spatial stream Multi User (MU) MIMO for up to 2.4Gbps wireless data rate to up to four 1SS or two 2SS HE80 802.11ax DL-MU-MIMO capable client devices simultaneously (typical)
  • 2.4GHz radio:
    • Two spatial stream Single User (SU) MIMO for up to 575Mbps wireless data rate to individual 2SS HE40 802.11ax client devices or to two 1SS HE40 802.11ax DL-MU-MIMO capable client devices simultaneously (max)
    • Two spatial stream Single User (SU) MIMO for up to 287Mbps wireless data rate to individual 2SS HE20 802.11ax client devices or to two 1SS HE20 802.11ax DL-MU-MIMO capable client devices simultaneously (typical)
  • Support for up to 256 associated client devices per radio, and up to 16 BSSIDs per radio
  • Supported frequency bands (country-specific restrictions apply):
    • 2.400 to 2.4835GHz
    • 5.150 to 5.250GHz
    • 5.250 to 5.350GHz
    • 5.470 to 5.725GHz
    • 5.725 to 5.850GHz
  • Supported radio technologies:
    • 802.11b: Direct-sequence spread-spectrum (DSSS)
    • 802.11a/g/n/ac: Orthogonal frequency-division multiplexing (OFDM)
    • 802.11ax: Orthogonal frequency-division multiple access (OFDMA) with up to 16 resource units (for an 80MHz channel)
  • Supported modulation types:
    • 802.11b: BPSK, QPSK, CCK
    • 802.11a/g/n: BPSK, QPSK, 16-QAM, 64-QAM, 256-QAM (proprietary extension)
    • 802.11ac: BPSK, QPSK, 16-QAM, 64-QAM, 256-QAM, 1024-QAM (proprietary extension)
    • 802.11ax: BPSK, QPSK, 16-QAM, 64-QAM, 256-QAM, 1024-QAM
  • Supported data rates (Mbps) 1:
    • 802.11b: 1, 2, 5.5, 11
    • 802.11a/g: 6, 9, 12, 18, 24, 36, 48, 54
    • 802.11n (2.4GHz): 6.5 to 300 (MCS0 to MCS15, HT20 to HT40)
    • 802.11n (5GHz): 6.5 to 600 (MCS0 to MVC31, HT20 to HT40)
    • 802.11ac: 6.5 to 3,467 (MCS0 to MCS9, NSS = 1 to 4, VHT20 to VHT160)
    • 802.11ax (2.4GHz): 3.6 to 574 (MCS0 to MCS11, NSS = 1 to 2, HE20 to HE40)
    • 802.11ax (5GHz): 3.6 to 4,803 (MCS0 to MCS11, NSS = 1 to 4, HE20 to HE160)

Wi-Fi Antennas

  • AP-514:
    • Four RP-SMA connectors for external dual band antennas (A0 through A3, corresponding with radio chains 0 through 3). Worst-case internal loss between radio interface and external antenna connectors (due to diplexing circuitry): 1.3dB in 2.4GHz and 1.7dB in 5GHz.

Additional Interfaces

  • E0: HPE SmartRate port (RJ-45, maximum negotiated speed 2.5Gbps)
    • Auto-sensing link speed (100/1000/2500BASE-T) and MDI/MDX
    • 2.5Gbps speed complies with NBase-T and 802.3bz specifications
    • POE-PD: 48Vdc (nominal) 802.3af/802.3at POE
  • E1: 10/100/1000BASE-T Ethernet network interface (RJ-45)
    • Auto-sensing link speed and MDI/MDX
  • Link aggregation (LACP) support between both network ports for redundancy and increased capacity
  • DC power interface: 12Vdc (nominal, +/- 5%), accepts 2.1mm/5.5mm center-positive circular plug with 9.5mm length
  • USB 2.0 host interface (Type A connector)
    • Capable of sourcing up to 1A / 5W to an attached device

Power Sources and Power Consumption

  • The AP supports direct DC power and Power over Ethernet (POE; on port E0)
  • When both power sources are available, DC power takes priority over POE
  • Maximum (worst-case) power consumption:
    • DC powered: 16W
    • POE powered (802.3af, IPM enabled): 13.5W
    • POE powered (802.3at/bt): 20.8W

Mechanical

  • Dimensions/weight (AP-515; unit, excluding mount bracket):
    • (H) 46mm x (W) 200mm x (D) 200mm (1.8″ x 7.9″ x 7.9″)
    • Weight: 810g (28.5oz)
  • Dimensions/weight (AP-515; shipping):
    • (H) 72mm x (W) 230mm x (D) 220mm (2.8″ x 9.1″ x 9.1″)
    • Weight: 1,010g (35.5oz)

Warranty

  • Aruba’s hardware limited lifetime warranty