- Bạn chưa chọn sản phẩm nào
- Tiếp tục mua hàng
QNAP TVS-1282
The TVS-1282 features advanced hardware by adopting 6th Generation Intel® 14nm multi-core processors and was designed around the concept of tiered storage, application-based partitioning and network traffic distribution. Featuring PCIe Gen.3 slots that can support 10GbE/40GbE NIC, PCIe NVMe SSD, graphics cards, and USB 3.1 expansion cards
Mô tả
Thiết bị lưu trữ QNAP TVS-1282
| Ordering P/N | TVS-1282-i3-8G TVS-1282-i5-16G TVS-1282-i7-32G TVS-1282-i7-64G TVS-1282-i5-16G-450W TVS-1282-i7-32G-450W TVS-1282-i7-64G-450W |
|---|---|
| CPU | TVS-1282-i3-8G: Intel® Core™ i3-6100 3.7 GHz dual-core processor TVS-1282-i5-16G /TVS-1282-i5-16G-450W: Intel® Core™ i5-6500 3.2 GHz quad-core processor TVS-1282-i7-32G /TVS-1282-i7-32G-450W: Intel® Core™ i7-6700 3.4 GHz quad-core processor TVS-1282-i7-64G /TVS-1282-i7-64G-450W: Intel® Core™ i7-6700 3.4 GHz quad-core processor |
| System memory | Total DIMM slots: 4 Maximum memory: 64 GB (16 GB x4) Memory modules pre-installed: TVS-1282-i3-8G: 8 GB DDR4 RAM (4 GB x 2) TVS-1282-i5-16G / TVS-1282-i5-16G-450W: 16 GB DDR4 RAM (8 GB x 2) TVS-1282-i7-32G / TVS-1282-i7-32G-450W: 32 GB DDR4 RAM (8 GB x 4) TVS-1282-i7-64G / TVS-1282-i7-64G-450W: 64 GB DDR4 RAM (16 GB x 4) |
| Flash Memory | 512MB DOM |
| M.2 Slot | 2 x M.2 2242/2260/2280/22110 SATA 6Gb/s SSD Note: 1. The M.2 SSD is not included as standard. 2. M.2 SSD operations can easily generate excessive heat. It is recommended to install a heatsink (from QNAP or a third-party provider) on the M.2 SSD. |
| Hard Drive Tray | 4 x 2.5” SSD 8 x 2.5”/3.5” hard drive or SSD |
| Drive Interface | SATA 6Gbps/3Gbps; Hot-swappable |
| USB | 1 x USB 3.0 port (Front) 4 x USB 3.0 port (Rear) |
| LAN Port | 4 x GbE port (10GbE and 40GbE are supported with the purchase and installation of compatible network adapters) Note: 1. For a list of compatible network adapters, please visit the Compatibility List. 2. For instructions on how to install network adapters, please refer to Chapter 6 of the QNAP NAS Hardware Manual. |
| HDMI Output | 3 |
| Audio Input | Audio In: 2 x 6.3mm MIC In |
| Audio Output | 2 x built-in speaker, 1 x 3.5mm Line-out jack Note: Only one of the above audio output ports can work at a time. If a speaker is connected, the sound will output through the speaker. |
| LED Indicators | System status, 2.5” SSD, M.2 SSD, 3.5” HDD |
| Buttons | System: Power button, Reset button, USB one-touch-backup button |
| System Warning | Buzzer |
| Form Factor | Tower |
| Dimensions | 234.6 (H) x 369.9 (W) x 319.8 (D) mm 9.23 (H) x 14.56 (W) x 12.59 (D) inch |
| Weight | Net (NAS only): 11.55kg/ 25.46 lb Gross (with packing and accessories): 13.65 kg/ 30.09 lb |
| Sound Level (dB)* | Sound pressure (LpAm) (bystander position): 21.6 dB (with 8 x Seagate ST2000VN000-1HJ164 hard drive installed) |
| Temperature | 0-40˚C |
| Relative Humidity | 5~95% non-condensing, wet bulb: 27˚C |
| Power Supply | TVS-1282-i3-8G / TVS-1282-i5-16G / TVS-1282-i7-32G / TVS-1282-i7-64G: Input: 100-240V~, 3-1.5A, 60-50Hz; Output 250W TVS-1282-i5-16G-450W / TVS-1282-i7-32G-450W / TVS-1282-i7-64G-450W: Input: 100-240V~, 8-4A, 60-50Hz; Output: 450W Note: If you plan to use a graphics card with your NAS, please check its power requirements beforehand. When using advanced graphics cards, the TVS-1282-i5-16G-450W and TVS-1282-i7-32G-450W are recommended as they have a suitable power supply for these graphics cards. |
| PCIe Slot | 3 (1* PCIe Gen3 x8; 2* PCIe Gen3 x4) |
| Fan | System: 3 x 8 cm cooling fan CPU: 1 x 9 cm fan |
