Cisco AIR-AP2802E-S-K9

Cisco AIR-AP2802E-S-K9

AIR-AP2802E-S-K9 – Cisco Aironet 2802E Access Point, 802.11ac Wave 2 AP w/CleanAir, 4×4:3, External Antenna, 2xGbE, S Regulatory Domain, Configurable

Danh mục:

Mô tả

Thiết bị Wifi Indoor Cisco AIR-AP2802E-S-K9

Part Number AIR-AP2802E-S-K9
Integrated antennas Flexible radio (either 2.4 GHz or 5 GHz)

– 2.4 GHz, gain 4 dBi, External antenna, omnidirectional in azimuth

– 5 GHz, gain 6 dBi, External directional antenna, elevation plane beamwidth 90°

Dedicated 5-GHz radio

– 5 GHz, gain 5 dBi, External antenna, omnidirectional in azimuth

Interfaces ◦ 2×100/1000BASE-T autosensing (RJ-45)

– Management console port (RJ-45)

– USB 2.0 (enabled via future software)

Indicators – Status LED indicates boot loader status, association status, operating status, boot loader warnings, boot loader errors
Dimensions (W x L x H) – Access point (without mounting brackets): 2802I: 8.66” x 8.68” x 2.17”, 2802E: 8.66” x 8.77” x 2.50”
Weight – 3.53 lb (1.6 kg)
Environmental – Nonoperating (storage) temperature: -22° to 158°F (-30° to 70°C)

– Nonoperating (storage) altitude test: 25˚C, 15,000 ft.

– Operating temperature: 32° to 104°F (0° to 40°C)

– Operating humidity: 10% to 90% (noncondensing)

– Operating altitude test: 40˚C, 9843 ft.

System – 1024 MB DRAM

– 256 MB flash

Powering options – 802.3at PoE+, Cisco Universal PoE (Cisco UPOE®)

– 802.3at power injector (AIR-PWRINJ6=)

Power draw – 26W at the PSE (22.6W at the PD) with all features enabled except for the USB 2.0 port

– 30W at the PSE (25.5W at the PD) with the USB 2.0 port enabled

Compliance – Safety: UL 60950-1, CAN/CSA-C22.2 No. 60950-1, UL 2043, IEC 60950-1, EN 60950-1

– Radio approvals: FCC Part 15.247, 15.407, RSS-247 (Canada), EN 300.328, EN 301.893 (Europe), ARIB-STD 66 (Japan), ARIB-STD T71 (Japan), EMI and susceptibility (Class B), FCC Part 15.107 and 15.109, ICES-003 (Canada), VCCI (Japan), EN 301.489-1 and -17 (Europe), EN 50385

– IEEE standards: IEEE 802.11a/b/g, 802.11n, 802.11h, 802.11d, IEEE 802.11ac

– Security: 802.11i, WPA2, WPA, 802.1X, AES

– Extensible Authentication Protocol (EAP) types: EAP-Transport Layer Security (TLS), EAP-Tunneled TLS (TTLS) or Microsoft Challenge Handshake Authentication Protocol Version 2 (MSCHAPv2), Protected EAP (PEAP) v0 or EAP-MSCHAPv2, EAP-Flexible Authentication via Secure Tunneling (FAST), PEAP v1 or EAP-Generic Token Card (GTC), EAP-Subscriber Identity Module (SIM)

– Multimedia: Wi-Fi Multimedia (WMM)

– Other: FCC Bulletin OET-65C, RSS-102

Software – Cisco Unified Wireless Network Software Release 8.2.111.0 or later

– Cisco IOS® XE Software Release 16.3

Supported wireless LAN controllers – Cisco 2500 Series Wireless Controllers, Cisco Wireless Controller Module for ISR G2, Cisco Wireless Services Module 2 (WiSM2) for Catalyst® 6500 Series Switches, Cisco 5500 Series Wireless Controllers, Cisco Flex® 7500 Series Wireless Controllers, Cisco 8500 Series Wireless Controllers, Cisco Virtual Wireless Controller

– Cisco Catalyst 3850 Series Switches, Cisco Catalyst 3650 Series Switches

– Cisco Mobility Express

802.11n version 2.0 (and related) capabilities – 4×4 MIMO with three spatial streams

– Maximal ratio combining (MRC)

– 802.11n and 802.11a/g beamforming

– 20- and 40-MHz channels

– PHY data rates up to 450 Mbps (40 MHz with 5 GHz)

– Packet aggregation: A-MPDU (Tx/Rx), A-MSDU (Tx/Rx)

– 802.11 dynamic frequency selection (DFS)

– Cyclic shift diversity (CSD) support

802.11ac Wave 1 capabilities – 4×4 MIMO with three spatial streams

– MRC

– 802.11ac beamforming

– 20-, 40-, and 80-MHz channels

– PHY data rates up to 1.3 Gbps (80 MHz in 5 GHz)

– Packet aggregation: A-MPDU (Tx/Rx), A-MSDU (Tx/Rx)

– 802.11 DFS

– CSD support

802.11ac Wave 2 capabilities – 4×4 MU-MIMO with three spatial streams

– MRC

– 802.11ac beamforming

– 20-, 40-, 80, 160-MHz channels

– PHY data rates up to 5.2 Gbps

– Packet aggregation: A-MPDU (Tx/Rx), A-MSDU (Tx/Rx)

– 802.11 DFS

– CSD support