Cisco AIR-AP3802I-SK910

Thiết bị Wifi Indoor Cisco AIR-AP3802I-SK910

Part Number	AIR-AP3802I-SK910
Integrated antennas	Flexible radio (either 2.4 GHz or 5 GHz) – 2.4 GHz, gain 4 dBi, internal antenna, omnidirectional in azimuth – 5 GHz, gain 6 dBi, internal directional antenna, elevation plane beamwidth 90° Dedicated 5-GHz radio – 5 GHz, gain 5 dBi, internal antenna, omnidirectional in azimuth
External antenna (sold separately)	– 3802e Series access points are certified for use with antenna gains up to 6 dBi (2.4 GHz and 5 GHz) – 3802p Series access points are certified for use with antenna gains up to 13 dBi (2.4 GHz and 5 GHz) with the AIR‑ANT2513-P4M-N= antenna – Cisco offers the industry’s broadest selection of antennas, delivering optimal coverage for a variety of deployment scenarios
Smart Antenna Connector	– Available on the 3802e Series and 3802p Series access points only – Requires the AIR-CAB002-DART-R= 2 ft smart antenna connector to RP-TNC connectors to connect a second antenna to the access point – Required when running the flexible radio as either a: ◦ Second 5-GHz serving radio ◦ Wireless Security Monitoring radio
Interfaces	◦ 2 Ethernet ports ◦ 100/1000/2500/5000 Multigigabit Ethernet (RJ-45) – IEEE 802.3bz ◦ CAT 5e cabling ◦ Higher-quality 10GBASE-T (CAT 6/6a) cabling ◦ 100/1000BASE-T autosensing (RJ-45 – AUX port) ◦ Management console port (RJ-45)
Indicators	– Status LED indicates boot loader status, association status, operating status, boot loader warnings, boot loader errors
Dimensions (W x L x H)	– Access point (without mounting brackets): 3802I: 8.66 x 8.68 x 2.46 in. (22 x 22 x 6.25 cm), 3802E: 8.66 x 8.68 x 2.62 in. (22 x 22 x 6.7 cm), 3802P: 8.66 x 8.68 x 2.62 in. (22 x 22 x 6.7 cm)
Weight	– 4.6 lb (2.09 kg)
Environmental	– Nonoperating (storage) temperature: -22° to 158°F (-30° to 70°C) – Nonoperating (storage) altitude test: 25˚C, 15,000 ft. – Operating temperature: -4° to 122°F (-20° to 50°C) – Operating humidity: 10% to 90% (noncondensing) Operating altitude test: 40˚C, 9843 ft.
System	– 1024 MB DRAM – 256 MB flash
Powering options	– 802.3at PoE+, Cisco Universal Power over Ethernet (Cisco UPOE^®) – 802.3at power injector (AIR-PWRINJ6=) – 50W power supply (AIR-PWR-50=)
Power draw	– 30W at the PSE (25.5W at the PD) with all features enabled except for the USB 2.0 port – 34W at the PSE (31.1W at the PD) with the USB 2.0 port enabled
Compliance	– Safety: UL 60950-1, CAN/CSA-C22.2 No. 60950-1, UL 2043, IEC 60950-1, EN 60950-1 – Radio approvals: FCC Part 15.247, 15.407, RSS-247 (Canada), EN 300.328, EN 301.893 (Europe), ARIB-STD 66 (Japan), ARIB-STD T71 (Japan), EMI and susceptibility (Class B), FCC Part 15.107 and 15.109, ICES-003 (Canada), VCCI (Japan), EN 301.489-1 and -17 (Europe), EN 50385 – IEEE standards: IEEE 802.11a/b/g, 802.11n, 802.11h, 802.11d, IEEE 802.11ac – Security: 802.11i, WPA2, WPA, 802.1X, AES – Extensible Authentication Protocol (EAP) types: EAP-Transport Layer Security (TLS), EAP-Tunneled TLS (TTLS) or Microsoft Challenge Handshake Authentication Protocol Version 2 (MSCHAPv2), Protected EAP (PEAP) v0 or EAP-MSCHAPv2, EAP-Flexible Authentication via Secure Tunneling (FAST), PEAP v1 or EAP-Generic Token Card (GTC), EAP-Subscriber Identity Module (SIM) – Multimedia: Wi-Fi Multimedia (WMM) – Other: FCC Bulletin OET-65C, RSS-102
Software and supported wireless LAN controllers	– Cisco Unified Wireless Network Software Release 8.2.111.0 or later – Cisco 2500 Series Wireless Controllers, Cisco Wireless Controller Module for ISR G2, Cisco Wireless Services Module 2 (WiSM2) for Catalyst^® 6500 Series Switches, Cisco 5500 Series Wireless Controllers, Cisco Flex^® 7500 Series Wireless Controllers, Cisco 8500 Series Wireless Controllers, Cisco Virtual Wireless Controller – Cisco IOS^® XE Software Release 16.3 – Cisco Catalyst 3850 Series and 3650 Series Switches
802.11n version 2.0 (and related) capabilities	– 4×4 MIMO with three spatial streams – Maximal ratio combining (MRC) – 802.11n and 802.11a/g beamforming – 20- and 40-MHz channels – PHY data rates up to 450 Mbps (40 MHz with 5 GHz). – Packet aggregation: A-MPDU (Tx/Rx), A-MSDU (Tx/Rx) – 802.11 dynamic frequency selection (DFS) – Cyclic shift diversity (CSD) support
802.11ac Wave 1 capabilities	– 4×4 MIMO with three spatial streams – MRC – 802.11ac beamforming – 20-, 40-, and 80-MHz channels – PHY data rates up to 1.3 Gbps (80 MHz in 5 GHz) – Packet aggregation: A-MPDU (Tx/Rx), A-MSDU (Tx/Rx) – 802.11 DFS – CSD support
802.11ac Wave 2 capabilities	– 4×4 MU-MIMO with three spatial streams – MRC – 802.11ac beamforming – 20-, 40-, 80, 160-MHz channels – PHY data rates up to 5.2 Gbps – Packet aggregation: A-MPDU (Tx/Rx), A-MSDU (Tx/Rx) – 802.11 DFS – CSD support

Giỏ hàng0