Cisco WAP581-E-K9

Cisco WAP581-E-K9

Cisco WAP581-E-K9 Wireless-AC/N Premium Dual Radio Access Point with PoE The Cisco WAP581 Wireless-AC Dual Radio Wave 2 Access Point with 2.5GbE LAN uses concurrent dual-band radio for improved coverage and user capacity. The 4 x 4 MU-MIMO technology on the 5.0-GHz radio and 3 x 3 MIMO on the 2.4-GHz radio allow the access point to run at maximum performance and deliver better user experience.

Danh mục:

Mô tả

Thiết bị mạng Wifi Cisco WAP581-E-K9

Specifications Description
Standards IEEE 802.11ac, 802.11a, 802.11n, 802.11g, 802.11b, 802.3af, 802.3u, 802.1X (security authentication), 802.1Q (VLAN), 802.1D (spanning tree), 802.11i (WPA2 security), 802.11e (wireless QoS), IPv4 (RFC 791), and IPv6 (RFC 2460)
Cabling type Category 5e or better
Antennas Internal antennas optimized for installation on a wall or ceiling
Operating system Linux Software
Physical Interfaces
Ports 2 GE ports – one 2.5G and second one 10/100/1000 Ethernet, with support for 802.3at at PoE; support is only for port 1
Buttons Reset button
Lock slot Slot for Kensington lock
LEDs One multifunction LED
Physical Specifications
Physical dimensions
(H x W x D)
1.5 x 9.0 x 9.0 in. (38x 229 x 229 mm)
Weight 3 lb (1.4kg)
Network Capabilities
VLAN support Yes
Number of VLANs 1 management VLAN plus 32 VLANs for SSIDs
802.1X supplicant Yes
Service Set Identifier (SSID)-to-VLAN mapping Yes
Auto-channel selection Yes
Spanning tree Yes
Load balancing Yes
IPv6 Yes

●  IPv6 host support
●  IPv6 RADIUS, syslog, and Network Time Protocol (NTP)
Layer 2 802.1Q-based VLANS, 32 active VLANS plus 1 management VLAN
W-Fi Protected Access (WPA) and WPA2 Yes, including enterprise authentication
Access control Yes, management access control list (ACL) plus MAC ACL
Secure management Secure HTTP (HTTPS)
SSID broadcast Yes
Rogue access point detection Yes
Mounting and Physical Security
Multiple mounting options Mounting bracket included for easy ceiling or wall mounting
Physical security lock Kensington lock slot
Quality of Service
QoS Wi-Fi Multimedia and Traffic Specification (WMM TSPEC) and client QoS
Wireless throughput Up to 2.8-Gbps data rate (real-world throughput varies)
Recommended user support Up to 200 connective users; 50 active users per radio
Multiple Access Point Management
Single Point Setup Yes
Number of access points per cluster 16
Active clients per cluster 960
Web user interface Built-in web user interface for easy browser-based configuration (HTTP and HTTPS)
Management protocols Web browser, Simple Network Management Protocol (SNMP) v3, and Bonjour
Remote management Yes
Event logging Local, remote syslog, and email alerts
Network diagnostics Logging and packet capture
Web firmware upgrade Firmware upgradable through web browser; imported or exported configuration file
Dynamic Host Configuration Protocol (DHCP) DHCP client
IPv6 host Yes
HTTP redirect Yes