Cisco AIR-AP3802E-SK910C

Cisco AIR-AP3802E-SK910C

AIR-AP3802E-SK910C – Cisco Aironet 3802E Access Point, 802.11ac Wave 2 10 AP w/CleanAir, 4×4:3, Mod, External Antenna, mGig, S Regulatory Domain, Configurable, Indoor, Eco-pack (dual-band 802.11a/g/n/ac), 10 quantity access points.

Danh mục:

Mô tả

Thiết bị Wifi Indoor Cisco AIR-AP3802I-SK910C

Part Number AIR-AP3802E-SK910C
Description 802.11ac Wave 2 10 AP w/CleanAir, 4×4:3, Mod, External Antenna, mGig, S Regulatory Domain, Configurable
Features
  • 4×4 MU-MIMO with three spatial streams
  • MRC
  • 802.11ac beamforming
  • 20-, 40-, 80, 160-MHz channels
  • PHY data rates up to 5.2 Gbps
  • Packet aggregation: A-MPDU (Tx/Rx), A-MSDU (Tx/Rx)
  • 802.11 DFS
  • CSD support
Integrated antennas Flexible radio (either 2.4 GHz or 5 GHz)

–  2.4 GHz, gain 4 dBi, External antenna, omnidirectional in azimuth

–  5 GHz, gain 6 dBi, External directional antenna, elevation plane beamwidth 90°

Dedicated 5-GHz radio

–  5 GHz, gain 5 dBi, External antenna, omnidirectional in azimuth

External antenna (sold separately) –  3802e Series access points are certified for use with antenna gains up to 6 dBi (2.4 GHz and 5 GHz)

–  3802p Series access points are certified for use with antenna gains up to 13 dBi (2.4 GHz and 5 GHz) with the AIR‑ANT2513-P4M-N= antenna

–  Cisco offers the industry’s broadest selection of antennas, delivering optimal coverage for a variety of deployment scenarios

Smart Antenna Connector –  Available on the 3802e Series and 3802p Series access points only

–  Requires the AIR-CAB002-DART-R= 2 ft smart antenna connector to RP-TNC connectors to connect a second antenna to the access point

–  Required when running the flexible radio as either a:

◦   Second 5-GHz serving radio

◦   Wireless Security Monitoring radio

Interfaces ◦   2 Ethernet ports

◦   100/1000/2500/5000 Multigigabit Ethernet (RJ-45) – IEEE 802.3bz

◦   CAT 5e cabling

◦   Higher-quality 10GBASE-T (CAT 6/6a) cabling

◦   100/1000BASE-T autosensing (RJ-45 – AUX port)

◦   Management console port (RJ-45)

Indicators –  Status LED indicates boot loader status, association status, operating status, boot loader warnings, boot loader errors
Dimensions (W x L x H) –  Access point (without mounting brackets): 3802I: 8.66 x 8.68 x 2.46 in. (22 x 22 x 6.25 cm), 3802E: 8.66 x 8.68 x 2.62 in. (22 x 22 x 6.7 cm), 3802P: 8.66 x 8.68 x 2.62 in. (22 x 22 x 6.7 cm)
Weight –  4.6 lb (2.09 kg)
Environmental –  Nonoperating (storage) temperature: -22° to 158°F (-30° to 70°C)

–  Nonoperating (storage) altitude test: 25˚C, 15,000 ft.

–  Operating temperature: -4° to 122°F (-20° to 50°C)

–  Operating humidity: 10% to 90% (noncondensing)

Operating altitude test: 40˚C, 9843 ft.

System –  1024 MB DRAM

–  256 MB flash

Powering options –  802.3at PoE+, Cisco Universal Power over Ethernet (Cisco UPOE®)

–  802.3at power injector (AIR-PWRINJ6=)

–  50W power supply (AIR-PWR-50=)

Power draw –  30W at the PSE (25.5W at the PD) with all features enabled except for the USB 2.0 port

–  34W at the PSE (31.1W at the PD) with the USB 2.0 port enabled

Compliance –  Safety: UL 60950-1, CAN/CSA-C22.2 No. 60950-1, UL 2043, IEC 60950-1, EN 60950-1

–  Radio approvals: FCC Part 15.247, 15.407, RSS-247 (Canada), EN 300.328, EN 301.893 (Europe), ARIB-STD 66 (Japan), ARIB-STD T71 (Japan), EMI and susceptibility (Class B), FCC Part 15.107 and 15.109, ICES-003 (Canada), VCCI (Japan), EN 301.489-1 and -17 (Europe), EN 50385

–  IEEE standards: IEEE 802.11a/b/g, 802.11n, 802.11h, 802.11d, IEEE 802.11ac

–  Security: 802.11i, WPA2, WPA, 802.1X, AES

–  Extensible Authentication Protocol (EAP) types: EAP-Transport Layer Security (TLS), EAP-Tunneled TLS (TTLS) or Microsoft Challenge Handshake Authentication Protocol Version 2 (MSCHAPv2), Protected EAP (PEAP) v0 or EAP-MSCHAPv2, EAP-Flexible Authentication via Secure Tunneling (FAST), PEAP v1 or EAP-Generic Token Card (GTC), EAP-Subscriber Identity Module (SIM)

–  Multimedia: Wi-Fi Multimedia (WMM)

–  Other: FCC Bulletin OET-65C, RSS-102

Software and supported wireless LAN controllers –  Cisco Unified Wireless Network Software Release 8.2.111.0 or later

–  Cisco 2500 Series Wireless Controllers, Cisco Wireless Controller Module for ISR G2, Cisco Wireless Services Module 2 (WiSM2) for Catalyst® 6500 Series Switches, Cisco 5500 Series Wireless Controllers, Cisco Flex® 7500 Series Wireless Controllers, Cisco 8500 Series Wireless Controllers, Cisco Virtual Wireless Controller

–  Cisco IOS® XE Software Release 16.3

–  Cisco Catalyst 3850 Series and 3650 Series Switches

802.11n version 2.0 (and related) capabilities –  4×4 MIMO with three spatial streams

–  Maximal ratio combining (MRC)

–  802.11n and 802.11a/g beamforming

–  20- and 40-MHz channels

–  PHY data rates up to 450 Mbps (40 MHz with 5 GHz).

–  Packet aggregation: A-MPDU (Tx/Rx), A-MSDU (Tx/Rx)

–  802.11 dynamic frequency selection (DFS)

–  Cyclic shift diversity (CSD) support

802.11ac Wave 1 capabilities –  4×4 MIMO with three spatial streams

–  MRC

–  802.11ac beamforming

–  20-, 40-, and 80-MHz channels

–  PHY data rates up to 1.3 Gbps (80 MHz in 5 GHz)

–  Packet aggregation: A-MPDU (Tx/Rx), A-MSDU (Tx/Rx)

–  802.11 DFS

–  CSD support

802.11ac Wave 2 capabilities –  4×4 MU-MIMO with three spatial streams

–  MRC

–  802.11ac beamforming

–  20-, 40-, 80, 160-MHz channels

–  PHY data rates up to 5.2 Gbps

–  Packet aggregation: A-MPDU (Tx/Rx), A-MSDU (Tx/Rx)

–  802.11 DFS

–  CSD support