Cisco AIR-AP1815I-S-K9

Cisco AIR-AP1815I-S-K9 Integrated antennas ● 2.4 GHz, gain 2 dBi ● 5 GHz, gain 4 dBi Interfaces ● 1 x 10/100/1000BASE-T autosensing (RJ-45), Power over Ethernet (PoE) ● Management console port (RJ-45) Indicators ● Status LED indicates boot loader status, association status, operating status, boot loader warnings, boot loader errors

Thiết bị mạng Wfi Cisco AIR-AP1815I-S-K9

Part Number	AIR-AP1815I-S-K9
Integrated antennas	– 2.4 GHz, gain 2 dBi – 5 GHz, gain 4 dBi
Interfaces	– 1 x 10/100/1000BASE-T autosensing (RJ-45), Power over Ethernet (PoE) – Management console port (RJ-45)
Indicators	– Status LED indicates boot loader status, association status, operating status, boot loader warnings, boot loader errors
Dimensions (W x L x H)	– Access point (without mounting bracket): 6 x 6 x 1.3 in (150.8 x 150.8 x 33 mm)
Weight	– Access point without mounting bracket or any other accessories: 14 oz (400 g)
Environmental	– Operating ◦ Temperature: 32° to 104°F (0° to 40°C) ◦ Humidity: 10% to 90% (noncondensing) ◦ Max. altitude: 9843 ft (3000 m) @ 40°C – Nonoperating (storage and transportation) ◦ Temperature: -22° to 158°F (-30° to 70°C) ◦ Humidity: 10% to 90% (noncondensing) ◦ Max. altitude: 15,000 ft (4500 m) @ 25°C
System	– 1 GB DRAM – 256 MB flash – 710 MHz quad core
Powering options	– 802.3af/at Ethernet switch – Optional Cisco power injectors (AIR-PWRINJ5=, AIR-PWRINJ6=)
Power draw	– 8.3W (maximum, on PoE)
Physical security	– Torx security screw, included with the access point
Accessories	– Mounting bracket: AIR-AP-BRACKET8= (available as spare) – Physical security kit: AIR-SEC-50= (sold separately), with 50 pcs. Security screws used to secure access point onto wall-mounting bracket, 50 pcs. RJ-45 caps and 2 pcs. unlock keys used to block physical access to Ethernet ports
Compliance	– Safety: UL 60950-1, CAN/CSA-C22.2 No. 60950-1, UL 2043, IEC 60950-1, EN 60950-1 – Radio approvals: FCC Part 15.247, 15.407, RSS-247 (Canada), EN 300.328, EN 301.893 (Europe), ARIB-STD 66 (Japan), ARIB-STD T71 (Japan), EMI and susceptibility (Class B), FCC Part 15.107 and 15.109, ICES-003 (Canada), VCCI (Japan), EN 301.489-1 and -17 (Europe), EN 50385 – IEEE standards: IEEE 802.11a/b/g, 802.11n, 802.11h, 802.11d, IEEE 802.11ac – Security: 802.11i, WPA2, WPA, 802.1X, AES – Extensible Authentication Protocol (EAP) types: EAP-Transport Layer Security (TLS), EAP-Tunneled TLS (TTLS) or Microsoft Challenge Handshake Authentication Protocol Version 2 (MSCHAPv2), Protected EAP (PEAP) v0 or EAP-MSCHAPv2, EAP-Flexible Authentication via Secure Tunneling (FAST), PEAP v1 or EAP-Generic Token Card (GTC), EAP-Subscriber Identity Module (SIM) – Multimedia: Wi-Fi Multimedia (WMM) – Other: FCC Bulletin OET-65C, RSS-102
Authentication and security	– Advanced Encryption Standard (AES) for Wi-Fi Protected Access 2 (WPA2) – 802.1X, RADIUS authentication, authorization and accounting (AAA) – 802.11r – 802.11i
Software	– Cisco Unified Wireless Network Software with AireOS Wireless Controllers Release 8.5 or later – Cisco Mobility Express
Maximum clients	– Maximum number of associated wireless clients: 200 per Wi-Fi radio, in total 400 clients per access point
802.11ac	– 2×2 single-user/multiuser MIMO with two spatial streams – Maximal ratio combining (MRC) – 20-, 40-, and 80-MHz channels – PHY data rates up to 866.7 Mbps (80 MHz on 5 GHz) – Packet aggregation: A-MPDU (Tx/Rx), A-MSDU (Rx) – 802.11 Dynamic Frequency Selection (DFS) – Cyclic shift diversity (CSD) support
Ethernet ports	– Authentication with 802.1X or MAC filtered – Dynamic VLAN or per port – Traffic locally switched or tunneled back to wireless LAN controller

Giỏ hàng0