Cisco C9120AXE-S

Cisco C9120AXE-S

C9120AXE-S – Cisco Catalyst 9120E WiFi 6 Access Points, Cisco Catalyst 9120AX Access Point, External antennas; 4×4:4 MIMO, S Domain, Indoor environments.

Danh mục:

Mô tả

Thiết bị Wifi Cisco Catalyst 9120E Access Point: Indoor, challenging environments, with external antennas

Part Number C9120AXE-S
Software
–  Cisco Unified Wireless Network Software Release 8.9.x or later
–  Cisco IOS ® XE Software Release 16.11 with AP Device Pack, or later
Supported wireless LAN controllers
–  Cisco Catalyst 9800 Series Wireless Controllers
–  Cisco 3500, 5520, and 8540 Series Wireless Controllers and Cisco Virtual Wireless Controller
802.11n version 2.0 (and related) capabilities
–  4×4 MIMO with four spatial streams
–  Maximal Ratio Combining (MRC)
–  802.11n and 802.11a/g beamforming
–  20- and 40-MHz channels
–  PHY data rates up to 890 Mbps (40 MHz with 5 GHz and 20 MHz with 2.4 GHz)
–  Packet aggregation: A-MPDU (transmit and receive), A-MSDU (transmit and receive)
–  802.11 Dynamic Frequency Selection (DFS)
–  Cyclic Shift Diversity (CSD) support
802.11ac
–  4×4 downlink MU-MIMO with four spatial streams
–  MRC
–  802.11ac beamforming
–  20-, 40-, 80-, and 160-MHz channels
–  PHY data rates up to 3.47 Gbps (160 MHz with 5 GHz)
–  Packet aggregation: A-MPDU (transmit and receive), A-MSDU (transmit and receive)
–  802.11 DFS
–  CSD support
802.11ax
–  4×4 downlink MU-MIMO with four spatial streams
–  Uplink/downlink OFDMA
–  TWT
–  BSS coloring
–  MRC
–  802.11ax beamforming
–  20-, 40-, 80-, and 160-MHz channels
–  PHY data rates up to 5.38 Gbps (160 MHz with 5 GHz and 20 MHz with 2.4 GHz)
–  Packet aggregation: A-MPDU (transmit and receive), A-MSDU (transmit and receive)
–  802.11 DFS
–  CSD support
Integrated antenna Flexible radio (either on 2.4GHz or on 5GHz)

–  2.4 GHz, peak gain 4 dBi, internal antenna, omnidirectional in azimuth
–  5 GHz, peak gain 5 dBi, internal antenna, omnidirectional in azimuth

Dedicated 5GHz radio

–  5 GHz, peak gain 4 dBi, internal antenna, omnidirectional in azimuth
External antenna (sold separately)
–  Cisco Catalyst 9120E Access Points are certified for use with antenna gains up to 6 dBi (2.4 GHz and 5 GHz)
–  Cisco Catalyst 9120P Access Points) are certified for use with antenna gains up to 13 dBi (2.4 GHz and 5 GHz) with the AIR-ANT2513-P4M-N= antenna
–  Cisco offers the industry’s broadest selection of antennas, delivering optimal coverage for a variety of deployment scenarios
–  Supports Self-Identifiable Antennas (SIA) on one RP-TNC port
Smart Antenna Connector
–  Available on the 9120E and on the 9120P only
–  Compact multi RF connector with DART interface
–  Requires the AIR-CAB002-DART-R= 2 ft smart antenna connector when used with antennas with RP-TNC connector
–  Required when running the flexible radio as either a second 5-GHz serving radio or a Wireless Security Monitoring radio
Interfaces
–  1x 100, 1000, 2500 Multigigabit Ethernet (RJ-45) – IEEE 802.3bz
–  Management console port (RJ-45)
–  USB 2.0 @ 3.75W (enabled via future software)
Indicators
–  Status LED indicates boot loader status, association status, operating status, boot loader warnings, and boot loader errors
Dimensions (W x L x H)
8.5 x 8.05x 2.0 (21.6 x 21.6 x 5.1 cm)”
Weight
3 lbs (1.36 kg)
PoE Power Consumption
802.3at (PoE+)
2.4-GHz radio 4×4
5-GHz radio 4×4
Link speed 2.5G
USB Yes
LLDP 25.5W