Cisco AIR-AP1815M-S-K9

Thiết bị Wifi Cisco AIR-AP1815M-S-K9

Part Number	AIR-AP1815M-S-K9
Integrated antennas	● 2.4 GHz, gain 2 dBi
	● 5 GHz, gain 4 dBi
		Interfaces	● 1 x 10/100/1000BASE-T autosensing (RJ-45), Power over Ethernet (PoE)
● Management console port (RJ-45)
	Indicators		● Status LED indicates boot loader status, association status, operating status, boot loader warnings, and boot loader errors
Dimensions (W x L x H)	● Access point (without mounting bracket): 6 x 6 x 1.3 in. (150.8 x 150.8 x 33mm)
Weight	● Access point without mounting bracket or any other accessories: 1.01 lb (460 grams)
Environmental	● Operating
		◦ Temperature: 32° to 104°F (0° to 40°C)
	◦ Humidity: 10% to 90% (noncondensing)
		◦ Max. altitude: 9,843 ft (3,000m) @ 40’C
	● Nonoperating (storage and transportation)
	◦ Temperature: –22° to 158°F (–30° to 70°C)
		◦ Humidity: 10% to 90% (noncondensing)
	◦ Max. altitude: 15,000 ft (4,500m) @ 25’C
		System	● 1-GB DRAM
	● 256-MB flash memory
			● 710-MHz quad-core
	Powering options			● 802.3af/at Ethernet switch
			● Optional Cisco power injectors (AIR-PWRINJ5=, AIR-PWRINJ6=)
		Power draw		● 12.5W (maximum, on PoE)
	Physical security	● Torx security screw, included with the access point
Accessories	● Mounting bracket: AIR-AP-BRACKET-8= (available as spare)
	● Physical security kit: AIR-SEC-50= (sold separately), with 50 pcs. security screws used to secure the access point onto wall-mounting bracket, 50 pcs. RJ-45 caps and 2 pcs. unlock keys used to block physical access to Ethernet ports
		Compliance	● Safety: UL 60950-1, CAN/CSA-C22.2 No. 60950-1, UL 2043, IEC 60950-1, EN 60950-1
● Radio approvals: FCC Part 15.247, 15.407, RSS-247 (Canada), EN 300.328, EN 301.893 (Europe), ARIB-STD 66 (Japan), ARIB-STD T71 (Japan), EMI and susceptibility (Class B), FCC Part 15.107 and 15.109, ICES-003 (Canada), VCCI (Japan), EN 301.489-1 and -17 (Europe), EN 50385
	● IEEE standards: IEEE 802.11a/b/g, 802.11n, 802.11h, 802.11d, IEEE 802.11ac
● Security: 802.11i, WPA2, WPA, 802.1X, AES
	● Extensible Authentication Protocol (EAP) types: EAP-Transport Layer Security (TLS), EAP-Tunneled TLS (TTLS) or Microsoft Challenge Handshake Authentication Protocol Version 2 (MSCHAPv2), Protected EAP (PEAP) v0 or EAP-MSCHAPv2, EAP-Flexible Authentication via Secure Tunneling (FAST), PEAP v1 or EAP-Generic Token Card (GTC), EAP-Subscriber Identity Module (SIM)
● Multimedia: Wi-Fi Multimedia (WMM)
	● Other: FCC Bulletin OET-65C, RSS-102
Authentication and security	● Advanced Encryption Standard (AES) for Wi-Fi Protected Access 2 (WPA2)
			● 802.1X, RADIUS authentication, authorization, and accounting (AAA)
	● 802.11r
			● 802.11i
	Software		● Cisco Unified Wireless Network Software with AireOS Wireless Controllers Release 8.5 or later
				● Cisco Mobility Express
		Maximum clients	● Maximum number of associated wireless clients: 200 per Wi-Fi radio, in total 400 clients per access point
802.11ac	● 2 x 2 single-user/multiuser MIMO with two spatial streams
		● Maximal ratio combining (MRC)
	● 20-, 40-, and 80-MHz channels
		● PHY data rates up to 866.7 Mbps (80 MHz on 5 GHz)
	● Packet aggregation: A-MPDU (Tx/Rx), A-MSDU (Rx)
		● 802.11 Dynamic Frequency Selection (DFS)
	● Cyclic shift diversity (CSD) support
	Ethernet ports	● Authentication with 802.1X or MAC filtered
			● Dynamic VLAN or per port
		● Traffic locally switched or tunneled back to wireless LAN controller
			Bluetooth (future availability)	● Integrated Bluetooth 4.1 (including BLE) radio
		● Maximum transmit power: 4 dBm
	● Antenna gain: 2 dBi

Giỏ hàng0