Mô tả
Thiết bị Wifi Cisco AIR-AP1815M-S-K9C
Part Number | AIR-AP1815M-S-K9C | |||||||
Authentication and security | ● Advanced Encryption Standard (AES) for Wi-Fi Protected Access 2 (WPA2)
● 802.1X, RADIUS authentication, authorization, and accounting (AAA) ● 802.11r ● 802.11i |
|||||||
Software | ● Cisco Unified Wireless Network Software with AireOS Wireless Controllers Release 8.5 or later
● Cisco Mobility Express |
|||||||
Supported WLAN Controllers | ● Cisco 2500 Series Wireless Controllers, Cisco 3500 Series Wireless Controllers, Cisco Wireless Controller Module for ISR G2, Cisco Wireless Services Module 2 (WiSM2) for Catalyst ® 6500 Series Switches, Cisco 5500 Series Wireless Controllers, Cisco Flex ® 7500 Series Wireless Controllers, Cisco 8500 Series Wireless Controllers, Cisco 9800 series Wireless Controllers,
● Cisco Mobility Express |
|||||||
Maximum clients | ● Maximum number of associated wireless clients: 200 per Wi-Fi radio, in total 400 clients per access point | |||||||
802.11ac | ● 2 x 2 single-user/multiuser MIMO with two spatial streams
● Maximal ratio combining (MRC) ● 20-, 40-, and 80-MHz channels ● PHY data rates up to 866.7 Mbps (80 MHz on 5 GHz) ● Packet aggregation: A-MPDU (Tx/Rx), A-MSDU (Rx) ● 802.11 Dynamic Frequency Selection (DFS) ● Cyclic shift diversity (CSD) support |
|||||||
Ethernet ports | ● Authentication with 802.1X or MAC filtered
● Dynamic VLAN or per port ● Traffic locally switched or tunneled back to wireless LAN controller |
|||||||
Bluetooth (future availability) | ● Integrated Bluetooth 4.1 (including BLE) radio
● Maximum transmit power: 4 dBm ● Antenna gain: 2 dBi |
|||||||
Integrated antennas | ● 2.4 GHz, gain 2 dBi
● 5 GHz, gain 4 dBi |
|||||||
Interfaces | ● 1 x 10/100/1000BASE-T autosensing (RJ-45), Power over Ethernet (PoE)
● Management console port (RJ-45) |
|||||||
Indicators | ● Status LED indicates boot loader status, association status, operating status, boot loader warnings, and boot loader errors | |||||||
Dimensions (W x L x H) | ● Access point (without mounting bracket): 6 x 6 x 1.3 in. (150.8 x 150.8 x 33mm) | |||||||
Weight | ● Access point without mounting bracket or any other accessories: 1.01 lb (460 grams) | |||||||
Environmental | ● Operating
◦ Temperature: 32° to 104°F (0° to 40°C) ◦ Humidity: 10% to 90% (noncondensing) ◦ Max. altitude: 9,843 ft (3,000m) @ 40’C ● Nonoperating (storage and transportation) ◦ Temperature: –22° to 158°F (–30° to 70°C) ◦ Humidity: 10% to 90% (noncondensing) ◦ Max. altitude: 15,000 ft (4,500m) @ 25’C |
|||||||
System | ● 1-GB DRAM
● 256-MB flash memory ● 710-MHz quad-core |
|||||||
Input power requirements | ● 802.3af or 802.3at power | |||||||
Powering options | ● 802.3af/at Ethernet switch
● Optional Cisco power injectors (AIR-PWRINJ5=, AIR-PWRINJ6=) |
|||||||
Power draw | ● Max power draw is 13.9W with 100 meters Category 5 cable | |||||||
Physical security | ● Torx security screw, included with the access point | |||||||
Mounting | ● Included with the access point: mounting bracket AIR-AP-BRACKET-8 | |||||||
Accessories | ● Mounting bracket: AIR-AP-BRACKET-8= (available as spare)
● Physical security kit: AIR-SEC-50= (sold separately), with 50 pcs. security screws used to secure the access point onto wall-mounting bracket, 50 pcs. RJ-45 caps and 2 pcs. unlock keys used to block physical access to Ethernet ports |
|||||||
Warranty | Limited Lifetime Hardware Warranty |