Cisco AIR-AP1815I-S-K9C

Thiết bị Wifi Cisco AIR-AP1815I-S-K9C

Part Number	AIR-AP1815I-S-K9C
Integrated antennas	● 2.4 GHz, gain 2 dBi
	● 5 GHz, gain 4 dBi
		Interfaces	● 1 x 10/100/1000BASE-T autosensing (RJ-45), Power over Ethernet (PoE)
● Management console port (RJ-45)
	Indicators		● Status LED indicates boot loader status, association status, operating status, boot loader warnings, boot loader errors
Dimensions (W x L x H)	● Access point (without mounting bracket): 6 x 6 x 1.3 in (150.8 x 150.8 x 33 mm)
Weight	● Access point without mounting bracket or any other accessories: 14 oz (400 g)
Environmental	● Operating
	◦ Temperature: 32° to 104°F (0° to 40°C)
		◦ Humidity: 10% to 90% (noncondensing)

	◦ Max. altitude: 9843 ft (3000 m) @ 40°C
		● Nonoperating (storage and transportation)
	◦ Temperature: -22° to 158°F (-30° to 70°C)
		◦ Humidity: 10% to 90% (noncondensing)
	◦ Max. altitude: 15,000 ft (4500 m) @ 25°C
		System	● 1 GB DRAM
	● 256 MB flash
			● 710 MHz quad core
	Powering options			● 802.3af/at Ethernet switch
			● Optional Cisco power injectors (AIR-PWRINJ5=, AIR-PWRINJ6=)
		Power draw		● 8.3W (maximum, on PoE)
Physical security	● Torx security screw, included with the access point
Accessories	● Mounting bracket: AIR-AP-BRACKET8= (available as spare)
	● Physical security kit: AIR-SEC-50= (sold separately), with 50 pcs. Security screws used to secure access point onto wall-mounting bracket, 50 pcs. RJ-45 caps and 2 pcs. unlock keys used to block physical access to Ethernet ports
		Compliance	● Safety: UL 60950-1, CAN/CSA-C22.2 No. 60950-1, UL 2043, IEC 60950-1, EN 60950-1
● Radio approvals: FCC Part 15.247, 15.407, RSS-247 (Canada), EN 300.328, EN 301.893 (Europe), ARIB-STD 66 (Japan), ARIB-STD T71 (Japan), EMI and susceptibility (Class B), FCC Part 15.107 and 15.109, ICES-003 (Canada), VCCI (Japan), EN 301.489-1 and -17 (Europe), EN 50385
	● IEEE standards: IEEE 802.11a/b/g, 802.11n, 802.11h, 802.11d, IEEE 802.11ac
● Security: 802.11i, WPA2, WPA, 802.1X, AES
	● Extensible Authentication Protocol (EAP) types: EAP-Transport Layer Security (TLS), EAP-Tunneled TLS (TTLS) or Microsoft Challenge Handshake Authentication Protocol Version 2 (MSCHAPv2), Protected EAP (PEAP) v0 or EAP-MSCHAPv2, EAP-Flexible Authentication via Secure Tunneling (FAST), PEAP v1 or EAP-Generic Token Card (GTC), EAP-Subscriber Identity Module (SIM)
● Multimedia: Wi-Fi Multimedia (WMM)
	● Other: FCC Bulletin OET-65C, RSS-102
Authentication and security			● Advanced Encryption Standard (AES) for Wi-Fi Protected Access 2 (WPA2)
	● 802.1X, RADIUS authentication, authorization and accounting (AAA)
			● 802.11r
	● 802.11i
			Software	● Cisco Unified Wireless Network Software with AireOS Wireless Controllers Release 8.5 or later
	● Cisco Mobility Express
		Maximum clients		● Maximum number of associated wireless clients: 200 per Wi-Fi radio, in total 400 clients per access point
802.11ac	● 2×2 single-user/multiuser MIMO with two spatial streams
	● Maximal ratio combining (MRC)
		● 20-, 40-, and 80-MHz channels
	● PHY data rates up to 866.7 Mbps (80 MHz on 5 GHz)
		● Packet aggregation: A-MPDU (Tx/Rx), A-MSDU (Rx)
	● 802.11 Dynamic Frequency Selection (DFS)
		● Cyclic shift diversity (CSD) support
	Ethernet ports		● Authentication with 802.1X or MAC filtered
		● Dynamic VLAN or per port
			● Traffic locally switched or tunneled back to wireless LAN controller

Giỏ hàng0