Dây nhảy Patch cord Dintek CAT5E UTP/FTP (0.5m,1m,1.2m,1.8m,2m,3m,5m)

Dây nhảy Patch cord Dintek CAT5E UTP/FTP (0.5m,1m,1.2m,1.8m,2m,3m,5m)

Dây nhảy Patch cord Dintek CAT.5E UTP (0.5m,1m,1.2m,1.8m,2m,3m,5m) Patch Cord UTP/FTP Cat.5e, 2 đầu đúc RJ45.

Danh mục:

Mô tả

Patch cord Dintek CAT.5E UTP/FTP (0.5m,1m,1.2m,1.8m,2m,3m,5mét)

–         Patch Cord UTP/FTP Cat.5e, 2 đầu đúc RJ45.

1201-03512Patch Cord UTP Cat.5e, 0,5m, 2 đầu đúc RJ45, yellow –  DINTEK
1201-04XXXPatch Cord UTP Cat.5e, 1.0m, 2 đầu đúc RJ45, yellow –  DINTEK
1201-03595Patch Cord UTP Cat.5e, 1.5m, 2 đầu đúc RJ45, yellow –  DINTEK
1201-03XXXPatch Cord UTP Cat.5e, 2.0m, 2 đầu đúc RJ45, yellow, Blue, Gray –  DINTEK
TaiwanPatch Cord UTP Cat.5e, 1.2m, 2 đầu đúc RJ45, yellow –  Taiwan
TaiwanPatch Cord UTP Cat.5e, 1.8m, 2 đầu đúc RJ45, yellow –  Taiwan
1201-04XXXPatch Cord UTP Cat.5e, 3.0m, 2 đầu đúc RJ45, yellow, Blue –  DINTEK
1201-04XXXPatch Cord UTP Cat.5e, 5.0m, 2 đầu đúc RJ45, yellow, Blue, Grey –  DINTEK
1201-0336XPatch Cord UTP Cat.5e, 10m, 2 đầu đúc RJ45, yellow, Blue, Grey –  DINTEK
1201-04XXXPatch Cord FTP Cat.5e, 3.0m, 2 đầu đúc RJ45 bọc kim loai, Yellow – DINTEK
TaiwanPatch Cord FTP Cat.5e, 3.0m, 2 đầu đúc RJ45 bọc kim loai, – Tawan

Features

–         24AWG stranded wire provides maximum flexibility.

–         Brilliant colors make management a snap

–         Fully tested to meet ANSI/TIA-568-C.2 category 5e requirement.

–         The various colors are available to meet TIA/EIA-606 standards.

–         The mechanical characteristics and transmission performance meet 16Mbps Token Ring, 10Base-T, 100Base-T, 155Mbps, 622Mbps ATM, Gigabit-Ethernet and 1.2Gbps ATM requirements.

Electrical Characteristics

Contact material: Phosphor bronze alloy
Contact plating: 24 Karat hard gold (50 micro-inch plating thickness) over 100 micro-inch nickel.

Cable Data

–         Twisted pair color code:
Pair 1> blue, white/blue ring.
Pair 2> orange, white/orange ring
Pair 3> green, white/green ring
Pair 4> brown, white/brown ring

–         Conductor: 24AWG (7×0.2±0.01mm) stranded anneal copper wire

–          Insulation material: HDPE,FRPE

–          Diameter of dielectric core: 0.99±0.02mm

–          Insulation thickness: min AVG 0.19mm

–          Number of twist pairs: 4 pairs

–          Assembly: 4 pairs of dielectric core shall be stranded in circular form.

–          Material of jacket: PVC/LSZH

–          Thickness of jacket: AVG 0.5mm

–          Nominal O.D.: 5.5±0.2mm

–          Flame rating: CM

–          Jacket color: red,orange,yellow,green,blue,grey, etc.

–          RJ45 Plug: Housing>polycarbonate

–          Contact>copper alloy 50u” gold plated over nickel

–          Strength: 20lbs. min

–          Durability: 200 cycles min.

–          Insulation resistance: 500 megaohms min.

–          Molded boots prevent pin from bending and cables from kink.

–          Wiring schemes: T568B

Applications

–         Voice

–         ISDN

–         10Base T(IEEE 802.3)

–         Fast Ethernet(IEEE802.3)

–         100Vg-AnyLAN(IEEE 802.12)

–         Token Ring(IEEE 802.5)

–         TP-PMD(ANSI X3T9.5)

–         100Base-T Ethernet(IEEE 802.3u)

–         155/622 Mbps ATM

–         1000Base-T

–         550 MHz Broadband video

Standards

–         UL, ETL Verifi ed

–         ANSI/TIA-568-C.2

–         ISO/IEC 11801

–         EN 50173

–         Sản xuất tại Taiwan.