Meraki MR33-HW

Meraki MR33-HW

Wireless Meraki MR33-HW 2.4 GHz 802.11b/g/n client access radio 5 GHz 802.11a/n/ac client access radio.

Danh mục:

Mô tả

Thiết bị mạng Wireless Meraki MR33-HW

Mã sản phẩm MR33-HW
Interfaces – 1x 10/100/1000 BASE-T Ethernet (RJ45)
– 1× DC power connector (5.5 mm × 2.5 mm, center positive)
Radio – 2.4 GHz 802.11b/g/n client access radio
– 5 GHz 802.11a/n/ac client access radio
– 2.4 GHz & 5 GHz WIDS/WIPS, spectrum analysis, and location analytics radio
– 2.4 GHz Bluetooth Low Energy (BLE) radio with beacon and BLE scanning support
– Concurrent operations of all four radios
Operating bands – 2.412-2.484 GHz
– 5.150-5.250 GHz (UNII-1)
– 5.250-5.350 GHz (UNII-2)
– 5.470-5.600, 5.660-5.725  GHz (UNII-2e)
– 5.725-5.825 GHz (UNII-3)
Antenna  – Integrated omni-directional antenna (5 dBi gain at 2.4 GHz, 6.2 dBi gain at 5 GHz)
802.11ac and 802.11n Capabilities – 2 x 2 multiple input, multiple output (MIMO) with two spatial streams
– SU-MIMO and DL MU-MIMO support
– Maximal ratio combining (MRC) and beamforming
– 20 and 40 MHz channels (802.11n)
– 20, 40, and 80 MHz channels (802.11ac Wave 2)
– Up to 256 QAM on both 2.4 GHz and 5 GHz bands
– Packet aggregation
Security – Integrated Layer 7 firewall with mobile device policy management
– Real-time WIDS/WIPS with alerting and automatic rogue AP containment with Air Marshal
– Flexible guest access with device isolation
– VLAN tagging (802.1q) and tunneling with IPsec VPN
– PCI compliance reporting
– WEP, WPA, WPA2-PSK, WPA2-Enterprise with 802.1X
– EAP-TLS, EAP-TTLS, EAP-MSCHAPv2, EAP-SIM
– TKIP and AES encryption
– Enterprise Mobility Management (EMM) & Mobile Device Management (MDM) integration
– Cisco ISE integration for Guest access and BYOD Posturing
Quality of Service – Advanced Power Save (U-APSD)
– WMM Access Categories with DSCP and 802.1p support
– Layer 7 application traffic identification and shaping
Mounting – Mounts to walls and vertical poles
– Mounting hardware included
Power – Power over Ethernet: 37-57 V (802.3at required; functionality-restricted 802.3af mode supported)
– Power consumption: 11W max (802.3af)
– Power over Ethernet injector sold separately
Weight – 13.2 oz (376.5 g)
Physical Dimensions  – 8.5” x 4.3” x 1.3” (215 mm x 110 mm x 32 mm)
Environment – 32 °F to 104 °F (0 °C to 40 °C)
– Humidity: 5 to 95% non-condensing
Warranty – 1 year hardware warranty with advanced replacement included