Meraki MR70-HW

Meraki MR70-HW

Wireless Meraki MR70 2.4 GHz 802.11b/g/n/ac client access radio 5 GHz 802.1 1a/n/ac client access radio 2.4 GHz & 5 GHz dual-band WIDS/WIPS, spectrum analysis, & location analytics radio.

Danh mục:

Mô tả

Thiết bị mạng Wireless Meraki MR70-HW

Mã sản phẩmMR70-HW
Interfaces– 1x 100/1000/2.5G BASE-T Ethernet & 1x 10/100/1000 BASE-T Ethernet (RJ45)
– 1× DC power connector (5.5 mm × 2.5 mm, center positive)
Radio– 2.4 GHz 802.11b/g/n/ax client access radio
– 5 GHz 802.11a/n/ac/ax Wave 2 client access radio
Operating bands– 2.412-2.484 GHz
– 5.150-5.250 GHz (UNII-1)
– 5.250-5.350 GHz (UNII-2)
– 5.470-5.600, 5.660-5.725  GHz (UNII-2e)
– 5.1725-5.825 GHz (UNII-3)
Antenna – Integrated omni-directional antenna (5 dBi gain at 2.4 GHz, 6.2 dBi gain at 5 GHz)
802.11ac and 802.11n Capabilities– 2 x 2 multiple input, multiple output (MIMO) with two spatial streams
– SU-MIMO and DL MU-MIMO support
– Maximal ratio combining (MRC) and beamforming
– 20 and 40 MHz channels (802.11n)
– 20, 40, and 80 MHz channels (802.11ac Wave 2)
– Up to 256 QAM on both 2.4 GHz and 5 GHz bands
– Packet aggregation
Security– Integrated Layer 7 firewall with mobile device policy management
– Real-time WIDS/WIPS with alerting and automatic rogue AP containment with Air Marshal
– Flexible guest access with device isolation
– VLAN tagging (802.1q) and tunneling with IPsec VPN
– PCI compliance reporting
– WEP, WPA, WPA2-PSK, WPA2-Enterprise with 802.1X
– EAP-TLS, EAP-TTLS, EAP-MSCHAPv2, EAP-SIM
– TKIP and AES encryption
– Enterprise Mobility Management (EMM) & Mobile Device Management (MDM) integration
– Cisco ISE integration for Guest access and BYOD Posturing
Quality of Service– Advanced Power Save (U-APSD)
– WMM Access Categories with DSCP and 802.1p support
– Layer 7 application traffic identification and shaping
Mounting– Mounts to walls and vertical poles
– Mounting hardware included
Power– Power over Ethernet: 37-57 V (802.3at required; functionality-restricted 802.3af mode supported)
– Power consumption: 11W max (802.3af)
– Power over Ethernet injector sold separately
Weight– 15.87 oz (0.45 kg)
Physical Dimensions – 9.65” x 4.53” x 1.18” (245 mm x 115 mm x 30 mm)
Environment– 32 °F to 104 °F (0 °C to 40 °C)
– Humidity: 5 to 95% non-condensing
Warranty– 1 year hardware warranty with advanced replacement included