Meraki MR32-HW

Meraki MR32-HW

Wireless Meraki MR32 One 2.4 GHz 802.11b/g/n, one 5 GHz 802.11a/n/ac, one dedicated for dual-band WIPS & spectrum analysis, and one dedicated to Bluetooth Low Energy.

Danh mục:

Mô tả

Thiết bị mạng Wireless Meraki MR32-HW

Mã sản phẩm MR32-HW
Interfaces – 1x 100/1000Base-T Ethernet (RJ45)
– 1x DC power connector (5 mm x 2.1 mm, center positive)
Radio – One 2.4 GHz 802.11b/g/n, one 5 GHz 802.11a/n/ac, one dedicated for dual-band WIPS & spectrum analysis, and one dedicated to Bluetooth Low Energy
– Concurrent operations of all four radios
Operating bands – FCC (US)
2.412-2.484 GHz
5.150-5.250 GHz (UNII-1)
5.725 -5.825 GHz (UNII-3)
– EU (Europe)
2.412-2.484 GHz
5.150-5.250 GHz (UNII-1)
5.250-5.350, 5.470-5.600, 5.660-5.725 GHz (UNII-2e)
Antenna  – Integrated omni-directional antennas (5 dBi gain at 2.4 GHz, 5.5 dBi gain at 5 GHz)
802.11ac and 802.11n Capabilities – 2 x 2 multiple input, multiple output (MIMO) with four spatial streams
– SU-MIMO and MU-MIMO support
– Maximal ratio combining (MRC) & beamforming
– 20 and 40 MHz channels (802.11n), 20, 40, 80, 160, 80 + 80 MHz channels (802.11ac)
– Up to 256-QAM on both 2.4 GHz & 5 GHz bands
– Packet aggregation
Security – Integrated Layer 7 firewall with mobile device policy management
– Real-time WIDS/WIPS with alerting and automatic rogue AP containment with Air Marshal
– Flexible guest access with device isolation
– VLAN tagging (802.1q) and tunneling with IPsec VPN
– PCI compliance reporting
– WEP, WPA, WPA2-PSK, WPA2-Enterprise with 802.1X
– EAP-TLS, EAP-TTLS, EAP-MSCHAPv2, EAP-SIM
– TKIP and AES encryption
– Enterprise Mobility Management (EMM) & Mobile Device Management (MDM) integration
– Cisco ISE integration for Guest access and BYOD Posturing
Quality of Service – Advanced Power Save (U-APSD)
– WMM Access Categories with DSCP and 802.1p support
– Layer 7 application traffic identification and shaping
Mounting – Mounts to walls and vertical poles
– Mounting hardware included
Power – Power over Ethernet: 37-57 V (802.3at required; functionality-restricted 802.3af mode supported)
– 12V DC
– Power consumption: 13.87W max (802.3af)
– Power over Ethernet injector sold separately
Weight – 25 oz (0.7kg)
Physical Dimensions  – 10.0” x 6.1” x 1.5” (253.4 mm x 155.8 mm x 37.1 mm
Environment – 32 °F to 104 °F (0 °C to 40 °C)
– Humidity: 5 to 95% non-condensing
Warranty – 1 year hardware warranty with advanced replacement included