Meraki MR18-HW

Meraki MR18-HW

Wireless Meraki MR18 One 802.11b/g/n, one 802.11a/n radio, and one dedicated for dual-band WIPS & spectrum analysis. Concurrent operation of all three radios Max data rate 600 Mbit/s.

Danh mục:

Mô tả

Thiết bị mạng Wireless Meraki MR18-HW

Mã sản phẩmMR18-HW
Interfaces– 1 × 100/1000Base-T Ethernet (RJ45) with 48V DC 802.3af PoE
– 1 × DC power connector (5mm x 2.1mm, center positive)
Radio– One 802.11b/g/n, one 802.11a/n radio, and one dedicated for dual-band WIPS & spectrum analysis
– Concurrent operation of all three radios
– Max data rate 600 Mbit/s
Operating bands– FCC (US)
2.412-2.484 GHz
5.150-5.250 GHz (UNII-1)
5.725 -5.825 GHz (UNII-3)
– EU (Europe)
2.412-2.484 GHz
5.150-5.250 GHz (UNII-1)
5.250-5.350, 5.470-5.600 GHz, 5.650-5.725 GHz (UNII-2)
Antenna – Integrated omni-directional antenna (Gain: 3 dBi @ 2.4 GHz, 5 dBi @ 5 GHz)
802.11ac and 802.11n Capabilities– 2 x 2 multiple input, multiple output (MIMO) with two spatial streams
– Maximal ratio combining (MRC)
– Beamforming
– 20 and 40 MHz channels
– Packet aggregation
– Cyclic shift diversity (CSD) support
Security– Integrated Layer 7 firewall with mobile device policy management
– Real-time WIDS/WIPS with alerting and automatic rogue AP containment with Air Marshal
– Flexible guest access with device isolation
– VLAN tagging (802.1q) and tunneling with IPsec VPN
– PCI compliance reporting
– WEP, WPA, WPA2-PSK, WPA2-Enterprise with 802.1X
– EAP-TLS, EAP-TTLS, EAP-MSCHAPv2, EAP-SIM
– TKIP and AES encryption
– Enterprise Mobility Management (EMM) & Mobile Device Management (MDM) integration
– Cisco ISE integration for Guest access and BYOD Posturing
Quality of Service– Advanced Power Save (U-APSD)
– WMM Access Categories with DSCP and 802.1p support
– Layer 7 application traffic identification and shaping
Mounting– Mounts to walls and vertical poles
– Mounting hardware included
Power– Power over Ethernet: 24-57 V (802.3at required; functionality-restricted 802.3af mode supported)
– 12V DC
– Power consumption: 9.8W max (802.3af)
– Power over Ethernet injector sold separately
Weight– 25.7 oz (0.73 kg)
Physical Dimensions – 7.25” x 5.69” x 1.17” (186 mm x 146 mm x 30 mm)
Environment– 32 °F to 104 °F (0 °C to 40 °C)
– Humidity: 5 to 95% non-condensing
Warranty– 1 year hardware warranty with advanced replacement included