Meraki MR66-HW

Meraki MR66-HW

Wireless Meraki MR66 One 802.11b/g/n and one 802.11a/n radio Dual concurrent operation in 2.4 and 5 GHz bands Max throughput rate 600 Mbit/s 2.4 GHz 26 dBm peak transmission power 5 GHz 24 dBm peak transmission power

Danh mục:

Mô tả

Thiết bị mạng Wireless Meraki MR66-HW

Mã sản phẩm MR66-HW
Interfaces – 1x 100/1000 Base-T Ethernet (RJ45) with 48V DC 802.3af PoE
– Two external N-type antenna connectors
Radio – One 802.11b/g/n and one 802.11a/n radio
– Dual concurrent operation in 2.4 and 5 GHz bands
– Max throughput rate 600 Mbit/s
– 2.4 GHz 26 dBm peak transmission power
– 5 GHz 24 dBm peak transmission power
– Max transmission power is decreased for certain geographies to comply with local regulatory requirements
Operating bands – FCC (US)
2.412-2.484 GHz
5.150-5.250 GHz (UNII-1)
5.725 -5.825 GHz (UNII-3)
– EU (Europe)
2.412-2.484 GHz
5.150-5.250 GHz (UNII-1)
5.250-5.350, 5.470-5.725 GHz (UNII-2)
Antenna  – Integrated omni-directional antennas (5.5 dBi gain at 2.4 GHz, 6.2 dBi gain at 5 GHz)
802.11ac and 802.11n Capabilities – 2 x 2 multiple input, multiple output (MIMO) with two spatial streams
– Maximal ratio combining (MRC)
– Beamforming
– Packet aggregation
– Cyclic shift diversity (CSD) support
Security – Integrated Layer 7 firewall with mobile device policy management
– Real-time WIDS/WIPS with alerting and automatic rogue AP containment with Air Marshal
– Flexible guest access with device isolation
– VLAN tagging (802.1q) and tunneling with IPsec VPN
– PCI compliance reporting
– WEP, WPA, WPA2-PSK, WPA2-Enterprise with 802.1X
– EAP-TLS, EAP-TTLS, EAP-MSCHAPv2, EAP-SIM
– TKIP and AES encryption
– Enterprise Mobility Management (EMM) & Mobile Device Management (MDM) integration
– Cisco ISE integration for Guest access and BYOD Posturing
Quality of Service – Advanced Power Save (U-APSD)
– WMM Access Categories with DSCP and 802.1p support
– Layer 7 application traffic identification and shaping
Mounting – Mounts to walls and vertical poles
– Mounting hardware included
Power – Power over Ethernet: 24-57 V (802.3at required; functionality-restricted 802.3af mode supported)
– 12V DC
– Power consumption: 10.5W max (802.3af)
– Power over Ethernet injector sold separately
Weight – 1.9 lb (862g)
Physical Dimensions  – 10.5” x 7.6” x 2.2” (267mm x 192mm x 57mm)
Environment – 32 °F to 104 °F (0 °C to 40 °C)
– Humidity: 5 to 95% non-condensing
Warranty – 1 year hardware warranty with advanced replacement included