Meraki MR45-HW

Thiết bị mạng Wireless Meraki MR45-HW

Mã sản phẩm	MR45-HW
Interfaces	– 1× 1000/2.5G BASE-T Ethernet – 1× DC power connector (5.5 mm × 2.5 mm, center positive)
Radio	– 2.4 GHz 802.11b/g/n/ax client access radio – 5 GHz 802.11a/n/ac/ax Wave 2 client access radio – 2.4 GHz and 5 GHz dual-band WIDS/WIPS, spectrum analysis, and location analytics radio – Bluetooth Low Energy (BLE) radio with Beacon support
Operating bands	– 2.412-2.484 GHz – 5.150-5.250 GHz (UNII-1) – 5.250-5.330 GHz (UNII-2) – 5.490-5.730 GHz (UNII-2e) – 5.735-5.835 GHz (UNII-3)
Antenna	– Integrated omni-directional antenna (5 dBi gain at 2.4 GHz, 6.2 dBi gain at 5 GHz)
802.11n Capabilities	– 8×8 multiple input, multiple output (MIMO) with 8 spatial streams – 4×4 multiple input, multiple output (MIMO) with 4 spatial streams – SU-MIMO and DL MU-MIMO support – Maximal ratio combining (MRC) and beamforming – 20 and 40 MHz channels (802.11n) – 20, 40, and 80 MHz channels (802.11ac Wave 2) – Up to 1024 QAM on both 2.4 GHz and 5 GHz bands – Packet aggregation
Security	– Integrated Layer 7 firewall with mobile device policy management – Real-time WIDS/WIPS with alerting and automatic rogue AP containment with Air Marshal – Flexible guest access with device isolation – VLAN tagging (802.1q) and tunneling with IPsec VPN – PCI compliance reporting – WEP, WPA, WPA2-PSK, WPA2-Enterprise with 802.1X – EAP-TLS, EAP-TTLS, EAP-MSCHAPv2, EAP-SIM – TKIP and AES encryption – Enterprise Mobility Management (EMM) & Mobile Device Management (MDM) integration – Cisco ISE integration for Guest access and BYOD Posturing
Quality of Service	– Advanced Power Save (U-APSD) – WMM Access Categories with DSCP and 802.1p support – Layer 7 application traffic identification and shaping
Mounting	– All standard mounting hardware included – Desktop, ceiling, and wall mount capable – Ceiling tile rail (9/16, 15/16 or 1 ½” flush or recessed rails), assorted cable junction boxes – Bubble level on mounting cradle for accurate horizontal wall mounting
Power	– Power over Ethernet: 42.5-57 V (802.3at required; functionality-restricted 802.3af mode supported) – Alternative 12 V DC input – Power consumption: 22W max (802.3af) – Power over Ethernet injector and DC adapter sold separately
Weight	– 28.22 oz (800 g)
Physical Dimensions	– 12.05” x 5.06” x 1.74” (30.6 cm x 12.84 cm x 4.426 cm), not including deskmount feet or mount plate
Environment	– 32 °F to 104 °F (0 °C to 40 °C) – Humidity: 5 to 95% non-condensing
Warranty	– 1 year hardware warranty with advanced replacement included

Giỏ hàng0