Meraki MR62-HW
  1. Trang chủ
  2. Sản Phẩm
  3. Công Nghệ Thông Tin và Dự Án
  4. Thiết bị mạng Meraki
  5. Wireless Meraki
Meraki MR72-HW
Meraki MR66-HW

Meraki MR62-HW

Wireless Meraki MR62-HW 2.4 GHz 802.11b/g/n radi Max data rate: 300 Mbit/s 2.4 GHz 26 dBm peak transmission power Max transmission power is decreased for certain geographies to comply with local regulatory requirements.

Danh mục:

Mô tả

Thiết bị mạng Wireless Meraki MR62-HW

Mã sản phẩm MR62-HW
Interfaces – 1x 100/1000 Base-T Ethernet (RJ45) with 48V DC 802.3af PoE
– Two external N-type antenna connectors
Radio – 2.4 GHz 802.11b/g/n radi
– Max data rate: 300 Mbit/s
– 2.4 GHz 26 dBm peak transmission power
– Max transmission power is decreased for certain geographies to comply with local regulatory requirements
Operating bands – FCC (US)
2.412-2.484 GHz
– EU (Europe)
2.412-2.484 GHz
Antenna  – Integrated omni-directional antennas (5.5 dBi gain at 2.4 GHz, 6.2 dBi gain at 5 GHz)
802.11ac and 802.11n Capabilities – 2 x 2 multiple input, multiple output (MIMO) with four spatial streams
– SU-MIMO and MU-MIMO support
– Maximal ratio combining (MRC) & beamforming
– 20 and 40 MHz channels (802.11n), 20, 40, 80, 160, 80 + 80 MHz channels (802.11ac)
– Up to 256-QAM on both 2.4 GHz & 5 GHz bands
– Packet aggregation
Security – Integrated Layer 7 firewall with mobile device policy management
– Real-time WIDS/WIPS with alerting and automatic rogue AP containment with Air Marshal
– Flexible guest access with device isolation
– VLAN tagging (802.1q) and tunneling with IPsec VPN
– PCI compliance reporting
– WEP, WPA, WPA2-PSK, WPA2-Enterprise with 802.1X
– EAP-TLS, EAP-TTLS, EAP-MSCHAPv2, EAP-SIM
– TKIP and AES encryption
– Enterprise Mobility Management (EMM) & Mobile Device Management (MDM) integration
– Cisco ISE integration for Guest access and BYOD Posturing
Quality of Service – Advanced Power Save (U-APSD)
– WMM Access Categories with DSCP and 802.1p support
– Layer 7 application traffic identification and shaping
Mounting – Mounts to walls and vertical poles
– Mounting hardware included
Power – Power over Ethernet: 24-57 V (802.3at required; functionality-restricted 802.3af mode supported)
– 12V DC
– Power consumption: 6.5W max (802.3af)
– Power over Ethernet injector sold separately
Weight – 1.5 lb (680g)
Physical Dimensions  – 10.5” x 7.6” x 2.2” (267mm x 192mm x 57mm)
Environment – 32 °F to 104 °F (0 °C to 40 °C)
– Humidity: 5 to 95% non-condensing
Warranty – 1 year hardware warranty with advanced replacement included