Mô tả
Thiết bị mạng Wireless Meraki MR53E-HW
Mã sản phẩm | MR53E-HW |
Interfaces | – 1x 10/100/1000 BASE-T Ethernet (RJ45) – 1× 100/1000/2.5G BASE-T Ethernet – 1× DC power connector (5.5 mm × 2.5 mm, center positive) |
Radio | – 2.4 GHz 802.11b/g/n/ax client access radio – 5 GHz 802.11a/n/ac/ax Wave 2 client access radio – 2.4 GHz and 5 GHz dual-band WIDS/WIPS, spectrum analysis, and location analytics radio – Bluetooth Low Energy (BLE) radio with Beacon support – Concurrent operation of all four radios – Max aggregate frame rate: 5.9 Gbps |
Operating bands | – 2.412-2.484 GHz – 5.150-5.250 GHz (UNII-1) – 5.250-5.350 GHz (UNII-2) – 5.470-5.600, 5.660-5.725 GHz (UNII-2e) – 5.1725-5.825 GHz (UNII-3) |
Antenna | – Integrated omni-directional antenna (5 dBi gain at 2.4 GHz, 6.2 dBi gain at 5 GHz) |
802.11n Capabilities | – 8×8 multiple input, multiple output (MIMO) with 8 spatial streams – 4×4 multiple input, multiple output (MIMO) with 4 spatial streams – SU-MIMO and DL MU-MIMO support – Maximal ratio combining (MRC) and beamforming – 20 and 40 MHz channels (802.11n) – 20, 40, and 80 MHz channels (802.11ac Wave 2) – Up to 1024 QAM on both 2.4 GHz and 5 GHz bands – Packet aggregation |
Security | – Integrated Layer 7 firewall with mobile device policy management – Real-time WIDS/WIPS with alerting and automatic rogue AP containment with Air Marshal – Flexible guest access with device isolation – VLAN tagging (802.1q) and tunneling with IPsec VPN – PCI compliance reporting – WEP, WPA, WPA2-PSK, WPA2-Enterprise with 802.1X – EAP-TLS, EAP-TTLS, EAP-MSCHAPv2, EAP-SIM – TKIP and AES encryption – Enterprise Mobility Management (EMM) & Mobile Device Management (MDM) integration – Cisco ISE integration for Guest access and BYOD Posturing |
Quality of Service | – Advanced Power Save (U-APSD) – WMM Access Categories with DSCP and 802.1p support – Layer 7 application traffic identification and shaping |
Mounting | – All standard mounting hardware included – Desktop, ceiling, and wall mount capable – Ceiling tile rail (9/16, 15/16 or 1 ½” flush or recessed rails), assorted cable junction boxes – Bubble level on mounting cradle for accurate horizontal wall mounting |
Power | – Power over Ethernet: 37-57 V (802.3at required; functionality-restricted 802.3af mode supported) – Alternative 12 V DC input – Power consumption: 22W max (802.3af) – Power over Ethernet injector and DC adapter sold separately |
Weight | – 38.45 oz (1.09 kg) |
Physical Dimensions | – 10.55″ × 6.3″ × 1.69″ (268 mm × 160 mm × 43 mm), not including deskmount feet or mount plate |
Environment | – 32 °F to 104 °F (0 °C to 40 °C) – Humidity: 5 to 95% non-condensing |
Warranty | – 1 year hardware warranty with advanced replacement included |